Coating Applications
PVC Coated Electrical Conduits and Coatings
For use in hazardous and non-hazardous environments conforming to National Electrical Manufacturers Association (NEMA) RN I and UL Specifications. S3C has assess to and can PVC coat the complete range of conduit fittings produced by Crouse Hinds.
[Download Technical Data Sheet]
PVC Coated Fence Posts and Accessories
Manufactured to AASHTO M181 Specification and used where security systems are a pre-requisite for sensitive installations & for facilities such as tennis courts to extend their life and improve aesthetics.
[Download Technical Data Sheet]
Poly Vinyl Chloride (PVC Industrial Coatings)
A high quality resin coating system applied on a wide range of substrates; steel, aluminum and galvanized steel. These coatings have excellent UV stability and resistance to air-borne pollutants and chemicals at room temperature. They are designed for extreme climatic exposures especially in wet and humid conditions and provide excellent electrical insulation. A heavy coating film thickness of up to 1 mm is possible.
PPA Industrial Coatings
A high quality Polyolefin coating system with a broad range of resins for different applications such as decorative, chemical and corrosion resistance. Can be applied to ferrous and non Ferrous substrates, is halogen free and certain grades meet potable water and food contact requirements.[Download Technical Data Sheet]
Super Durable Polyester
Formulated to provide corrosion protection on metallic substrates expossed to extreme climatic conditions, the UV resistance is 300% greater than standard polyesters. Coating can also be applied to aluminum, steel and galvanized substrates in areas of high humidity, coastal areas, petrochemical & down-stream industries, power plants, desalination plants. Typical applications include cable trays and ladders, raceways, struts and hanging systems and structural steel sections.
[Download Technical Data Sheet]
Standard Polyester
Used for aluminum claddings, curtain walling, etc., is moderately resistant to chalking, fading, UV. Preferable for indoor use but can be used out of doors if required.
[Download Technical Data Sheet]
Duraline & Duracoat
Composite ceramic/fluoropolymer coatings with excellent corrosion-resistant characteristics and are ideally suited for extending the life of the material in harsh and hostile environments. Effective in the coating of fluid handling devices, valves, piping, shafts and threaded components where close tolerances and wear resistance is critical.
[Download Technical Data Sheet 1]
[Download Technical Data Sheet 2]
Fusion Bonded Epoxy Coating (FBE)
FBE is a thermosetting barrier coating with excellent resistance against chemical and environmental corrosion. Areas of application include internal and external coating of pipelines, fittings, valves, chemical storage or process vessels, rebar wire mesh, fasteners, etc. FBE coatings are highly effective in buried or submerged conditions. FBE is commonly used in conjuction with cathodic protection system to increase efficiency and significantly reduce cost.
[Download Technical Data Sheet]
High Build Epoxy (HBE) Paints
Two-coat wet paint systems that form hard and tough coating films with excellent abrasion and impact resistance, and good adhesion properties, and excellent gloss and color retention. Can be applied to aluminum, steel and galvanized substrates.[Download Technical Data Sheet]
High Build Epoxy/Polyurethane (HBE/PU)
Two-coat wet paint systems taht form hard and yough coating films with excellent abrasion, impact resistance and UV resistance, good adhesion properties, and excellent gloss and retention. Can be applied to aluminum, steel and galvanized substrates. [Download Technical Data Sheet]
Fire Retardant Coatings
Water-borne intumescent or enhanced fire protection coatings for electrical cable, cable tray, wood, fiberboard, concrete and steel.
High Temperature Resistant Coatings
Corrosion resistant industrial coatings that protect metal surfaces operating at continuous temperatures from 500 °F (260 °C) to 1600 °F (871 °C). Can be used for a wide range of applications.
[Download Technical Data sheet]
DURABOLT Coated Fastener Systems
The most effective, corrosion resistant and maintenance-free method of joining flanged pipes, fittings, building structures, gantries, platforms, etc. DURABOLT fasteners are designed to offer protection against the most severe corrosive environments, offshore, on-shore, sub-marine, sub-surface, extreme temperature, etc. The topcoat's low-coefficient of friction and the corrosion resistance of the base coat ensures easy removalof fasteners and an increased life span, thus saving on expensive downtime and maintenance. The DURABOLT coating allows the use of standard steel bolts in environments where more costly and exotic materials would normally be specified.
Different grades of DURABOLT can be supplied for diverse working temperatures, permitting operative temperature from (-) 40° to 871° Celcius.
[Download Technical Data Sheet]
Polyvinylidene Difluoride (PVDF / PVF2)
The ultimate coating for aluminum claddings, curtain walling, etc., it is highly resistant to corrosion, chalking, salt spray, fading, high wind levels, ultra violet light and is easy to clean and maintain. Meets AAMA 2605-98 Specification.[Download Technical Data Sheet]
FluoroPolymer Coatings
Fluoropolymer coatings can be used on a wide range of materials such as the food industry to provide non stick properties, tool handles to change the surface texture, cutting tools to provide dry film lubricity and can also protect against corrosion. A wide variety of products are approved for food handling applications.
FLUOROBOLT Fastener Coating
A thin film coating designed for fasteners incorporating a two stage PTFE coating system. The first layer is designed to improve the corrosion resistance of the fastener whilst the second further improves the corrosion resistance and provides the threads with dry film lubricity,
Bus Bar Insulation
These coatings are thermosetting epoxy powders specially formulated for electrical insulation applications and produce a uniform high film coating with excellent adhesion, corrosion and chemical resistance. These coatings are primarily used as insulation on aluminum and copper bus bars and other steel barrier materials.
[Download Technical Data Sheet]